Canon CiRC2550, Руководство по обслуживанию

Страница: 653 / 774

Chapter 17
17-50
17.4.2 FEEDER
17.4.2.1 FEEDER Table
0013-8997
Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 / Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR C3080i / iR
C2550
*1; Displayed only in the case of the machine with DADF
T-17-39
17.4.3 SORTER
17.4.3.1 SORTER Table
0014-5586
Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 / Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080 / iR C3080i / iR
C2550
T-17-40
ACS-CNT - ACS-CNT (Used to adjust color recognition pixel count zone during ACS recognition.)
Increasing the setting value expands the recognition zone.
2
ACS-EN2 ACS judgement area adjustment (with DF stream reading)
Adjustment method
Increasing the setting value increases the judgement range.
Setting range: -2 to 2
[Factory settings and after RAM clear: 1]
2
ACS-CNT2 Colour judgement pixel count area adjustment in ACS judgement (with DF stream reading)
Adjustment method
Increasing the setting value increases the judgement range.
Setting range: -2 to 2
[Factory settings and after RAM clear: 0]
2
REOS-PG REOS processing coefficient selection in 1200 dpi
Setting range: 0 to 4
[Factory settings and after RAM clear: 0]
2
FEEDER>ADJUST (*1)
Sub item Description level.
DOCST Adjusting the Original Image Leading Edge
Method of adjustment
A higher setting will delay the image leading edge timing.
Range of adjustment
-50 to 50 (unit: 0.1mm)
[Factory default/After RAM clear:0]
1
LA-SPEED Adjusting the document feeding speed at the time of stream reading from the feeder
The speed becomes faster (image is reduced) by increasing setting value.
Range of adjustment: -30 to 30 (unit: 0.1%)
[Factory default/After RAM clear:0]
1
SORTER>ADJUST
Sub item Description level.
PNCH-HLE Adjustment of distance from sheet edges to punch hole positions
This adjusts the hole positions to meet the conditions of the individual user.
Setting range: -4 to 2 (in mm increments)
[Factory setting/value after clearing RAM: 0]
1
COPIER>ADJUST>MISC
Sub item Description level.