manualshive.com logo in svg

Canon Arizona 1300 Series, Руководство пользователя

Профессиональные печатные системы Canon Arizona серии 1300 - это надежные и мощные устройства для вашего бизнеса. У вас есть возможность скачать бесплатно руководство пользователя на manualshive.com. Используйте ключевые слова "Руководство пользователя", "руководство", "скачать", "бесплатно" для получения всей необходимой информации о продукте.

Поделиться
Скачать
background image

CAUTION

• Only use the materials the manufacturer recommends and that are developed for the

machine. Materials that have not been approved by the manufacturer may result in failure of
the machine.

• Use maintenance materials and other materials for their intended purpose only.
• Ink polluted gloves and uncured printed media are considered chemical waste and should be

disposed according to local regulations.

• Do not place any liquids on the machine.
• Curing of media of the Canon Production Printing supported media-list is tested and

considered sufficient under standard conditions. For curing of custom media see the user
manual.

• Waste from consumables must not be disposed of together with household rubbish. Do not

allow the product to reach the sewage system. Dispose of waste of consumables, supplies
and maintenance materials and its packaging containing residues according to all federal,
state and local applicable regulations.

UV ink

CAUTION

• UV inks and flush liquids can be harmful if not properly handled. Follow always the Safety

Data Sheets (SDS) guidelines carefully in order to ensure maximum safety.

• Avoid skin contact with ink and uncured printed media.
• Wear specified safety glasses when handling inks or maintenance materials.
• Wear gloves when contact with ink or maintenance materials is possible. Gloves should

always overlap sleeves. Follow the ink related Safety Data Sheets (SDS) guidelines carefully
in order to ensure maximum safety. For example use Ansell Microflex 93-260 gloves, which
offer a protection against UV inks and flush up to one hour. Pollution with other chemicals
can shorten the protection time against UV inks and flush.

• Do not reuse single-use gloves.
• Do not handle prints without gloves if the ink is not properly cured.
• If ink contacts your skin: clean immediately with soap and water. Do not use alcohol or other

solvents.

• If ink contacts your eye(s) flush with water, consult the Safety Data Sheet (SDS) and contact

a doctor.

• Inks are not suitable for food-related or children-related applications (e.g. plates, toys).
• Always measure the thickness of the media in use and set the print carriage height correctly

for that media. Avoid printing at a height greater than measured, as this causes excessive
emissions of UV-light and UV-ink (mist).

• All waste containing uncured or partly cured UV ink is hazardous and must be disposed of

separately in accordance with local regulations. Do not mix ink waste with non-hazardous
waste (household, office, etc.). Do not allow it to reach sewage systems or drinking water
supplies. Ink waste includes maintenance pads and cloths, gloves and any other material
containing uncured or partly cured UV ink. Disposal must be made according to all federal,
state and local applicable regulations.

• Waste ink must not be disposed of together with household rubbish. Do not allow the ink to

reach the sewage system. Dispose of waste ink and packaging containing ink residues
according to all federal, state and local applicable regulations.

Safety and Environment Information

Chapter 3 - Safety Information

25

Содержание Arizona 1300 Series

























































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Arizona 1300 Series

Oki C910 Service Manual preview
C910
Бренд: Oki Страницы: 282
MakerPi P2 Quick Start Manual preview
P2
Бренд: MakerPi Страницы: 21
Canon Pixma MG2400 Series Getting Started Manual preview
Pixma MG2400 Series
Бренд: Canon Страницы: 2
Samsung CLP 510N - Color Laser Printer Manual Del Usuario preview
CLP 510N - Color Laser Printer
Бренд: Samsung Страницы: 270
Samsung Bixolon SRP-270 Integrator'S Manual preview
Bixolon SRP-270
Бренд: Samsung Страницы: 13
Oki MC160MFP Network Manual preview
MC160MFP
Бренд: Oki Страницы: 32
Oki MB460 Setup Poster preview
MB460
Бренд: Oki Страницы: 2
Oki MB290 MFP Guia Do Usuário preview
MB290 MFP
Бренд: Oki Страницы: 96
Oki MB290 Quick Start Manual preview
MB290
Бренд: Oki Страницы: 2
Oki MB280 MFP User Manual preview
MB280 MFP
Бренд: Oki Страницы: 78
Oki MB280 Quick Start Manual preview
MB280
Бренд: Oki Страницы: 2
Oki MB260 MFP Wireless Usb Installation preview
MB260 MFP
Бренд: Oki Страницы: 2
Oki MB260 MFP Safety And Regulatory Information Manual preview
MB260 MFP
Бренд: Oki Страницы: 32
Oki MB260 MFP Guía Del Usuario preview
MB260 MFP
Бренд: Oki Страницы: 52
Oki MB260 MFP User Manual preview
MB260 MFP
Бренд: Oki Страницы: 49
Oki CX3641 MFP Guia De Instalação preview
CX3641 MFP
Бренд: Oki Страницы: 48
Oki C9850hdn Guía Del Usuario preview
C9850hdn
Бренд: Oki Страницы: 161
Oki C9800hdn Brochure preview
C9800hdn
Бренд: Oki Страницы: 6

Бренды по названию

Популярные бренды

Загрузить еще бренды