www.camplux.com
20
Visit Us: Camplux.com
8350 Patriot Blvd STE B, North Charleston, SC 29420
1(844) 538-7475
Optional:
A power switch can be placed in the living quarters for convenience, but
not required as a switch is located externally on the appliance. If the switch is
fused, make sure it is rated for lat least 3 amps.
(b) Locate entry point for the wiring to service the rear of the appliance. Ensure
entry point is not in the footprint space of the appliance Make sure any edges
are protected to prevent wire abrasion from occurring.
(c) Determine the appropriate wire gauge (AWG) for the 12V power supply length.
Ensure enough wire is available to make adequate connection.
−16AWG max. 40 feet
− 14AWG max. 66 feet
(d) Feed wire from power source to the entry point. Make connection to the power
source.
Electrical wiring diagram
Regardless of positive and negative polarity
Switch ON-OFF (optional)
Wiring
12V DC
12V DC
power supply
Wall controller
12V
White -
Black +
15A
Blue
Blue
RV wall
7. Prepare for Wall Control
(a) Determine a location to install the wall controller inside the RV.
(b) Drill a ¾" hole and clean edges.
(c) If necessary, run two electrical wires that extend the wall control connections
(blue wires) to the appliance.
Connections (blue wires) using the appropriate wire size. 16AWG max. 65ft.
