www.camplux.com
1
19
Visit Us: Camplux.com
8350 Patriot Blvd STE B, North Charleston, SC 29420
1(844) 538-7475
5. Water plumbing for RV water heater
6. Wires connection cautions and diagram
WARNING
Electrical shock hazard
●
Disconnect all power before performing any work.
●
Always use a certified and proven 12V isolated power supply, that is
properly grounded to the RV.
●
Follow all applicable codes, regulations and instruction material when
performing service work.
●
Failure to follow instruction could result in serious injury or death.
* Bypass kit(A,B,C) for winterizing (not in scope of delivery).
Shower
Faucet 1
Faucet 2
Pump
Gas cylinder
Propane
Gas regulator
Use PEX 1/2" NPT swivel fittings
to connect water inlet and outlet
(recommend).
Water tank
A*
B*
C*
●
Wiring connected to or in proximity of the appliance must be rated for 140°F
(60°C) minimum.
●
Use only insulated terminals for all electrical connections.
●
The appliance requires a power source that can adequately provide 10~17V
DC to function properly.
(a) Select a distribution branch greater than 3A, preferably 15 amp, to provide
nominal 12V to the appliance from the distribution panel.
NOTE:
The appliance has a built in 10A fuse, serviceable from the front of the
product. The appliance can be on a dedicated or shared branch circuit with the
same or higher rating.