www.camplux.com
14
Visit Us: Camplux.com
8350 Patriot Blvd STE B, North Charleston, SC 29420
1(844) 538-7475
Preparing the installation site
(a) Make sure that the appliance is in contact with the vehicle or a platform with
adequate weight-bearing capacity when install.
CAUTION
Sharp edges can cause cuts and injury!
Always wear protective gear such as gloves to avoid injuries from sharp
edges during installation work and while handling the appliance.
A
B
C
Water heater
RV out wall
Solid frame
4-corner
no radius
Solid floor
or platform
(b) To install on a carpeted area, install a metal or wood panel under the appliance
that extends at least 3" beyond the width and depth of the appliance.
(c) If escaping water may damage components or the vehicle, install a collection
of the pan below the appliance, direct the flow of water from the pan to outside
the vehicle
Prepare cutout opening
(a) Make sure that the front edge of the opening is surrounded by a solid frame to
firmly anchor the appliance. If needed, build an appropriate frame with the
following dimensions:
Width A = 12.75in.
Height B =12.75in.
Depth C
＞
20in.
Installation plan 1
Down edge of the opening is level with the floor.
