Campbell NL200, Руководство пользователя

Страница: 58 / 64

Appendix D. NL200/201 Driver Installation Instructions
D-4
D.3 Installing on Windows 7
If DevConfig 2.04 or later is installed on your computer, the
NL200/NL201 drivers were automatically copied to your computer
and you can skip to step 2.
1. Before you plug the NL200/NL201 into a computer USB port, you must first
run the install utility on the Resource DVD. This will ensure that the driver
files are copied where the operating system can find them. To run the install
utility, insert the Resource DVD into your computer. Under Products, type
NL200 (or NL201) and press Enter. The NL200 (or NL201) screen will be
displayed. Under software, click on NL200/NL201 Drivers. This will open
the install utility. Follow the prompts and the drivers will be copied to your
computer.
2. Connect a USB cable to the NL200/NL201 USB port and one of your
computer’s USB ports.
3. The operating system should now install the driver and will report that it is
ready for use once it has been installed.
D.4 Oops! What if you plug the NL200/NL201 into your
computer before installing the drivers?
1. Run the install utility on the Resource DVD. This will ensure that the driver
files are copied where the operating system can find them. To run the install
utility, insert the Resource DVD into your computer. Under Products, type
NL200 (or NL201) and press Enter. The NL200 (or NL201) screen will be
displayed. Under software, click on NL200/NL201 Drivers. This will open
the install utility. Follow the prompts and the drivers will be copied to your
computer.
2. Connect a USB cable to the NL200/NL201 USB port and one of your
computer’s USB ports.
3.
Open the Device Manager from the Windows’ Control Panel.
NOTE