Campbell NL200, Руководство пользователя

Страница: 16 / 64

NL200/201 Network Link Interface
6
Figure 4-3. Bridge Mode disabled
Some reasons you might want to use each of these modes are described below.
Refer to Section 6,
Configuring the NL200/201 , and Section 7, Operation , for
information on setting up your NL200/201 for each mode.
Campbell Scientific’s LoggerNet software is used to communicate with the
dataloggers once the NL200/201 is configured properly and connected to a
network.
Bridge Mode

Allows access to datalogger’s internal IP functionality when a peripheral port
is not accessible. For example accessing the HTTP/webpage, email, and FTP
capabilities of a CR800/850, ET107, RAWS, or CS110.