Campbell CR1000X страница 56 Скачать руководство пользователя | Manualshive

Страница: 56 / 238

background image

Size

parameter of the

DataTable()

instruction, the

Interval

and

Units

parameters of

the

DataInterval()

instruction. The datalogger uses those parameters to assign sectors in a

way that maximizes the life of its memory.

By default, data memory sectors are organized as ring memory. When the ring is full, oldest data
is overwritten by newest data. Using the

FillStop

statement sets a program to stop writing to

the data table when it is full, and no more data is stored until the table is reset. To see the total
number of records that can be stored before the oldest data is overwritten, or to reset tables, go
to Station Status > Table Fill Times in your datalogger support software.

Data concerning the datalogger memory are posted in the Status and DataTableInfo tables. For
additional information on these tables, see

Information tables and settings (advanced)

For additional information on datalogger memory, visit the Campbell Scientific blog
article, "

How to Know when Your Datalogger Memory is Getting Full

."

5.4.2 USR drive

Battery-backed SRAM can be partitioned to create a FAT USR drive, analogous to partitioning a
second drive on a computer hard disk. Certain types of files are stored to USR to reserve limited
CPU drive memory for datalogger programs and calibration files. Partitioning also helps prevent
interference from data table SRAM. The USR drive holds any file type within the constraints of the
size of the drive and the limitations on filenames. Files typically stored include image files from
cameras, certain configuration files, files written for FTP retrieval, HTML files for viewing with web
access, and files created with the

TableFile()

instruction. Measurement data can also be

stored on USR as discrete files by using the

TableFile()

instruction. Files on USR can be

collected using datalogger support software Retrieve command in File Control, or automatically
using the LoggerNet Setup > File Retrieval tab functions.

USR is not affected by program recompilation or formatting of other drives. It will only be reset if
the USR drive is formatted, a new operating system is loaded, or the size of USR is changed. USR
size is set manually by accessing it in the Settings Editor, or programmatically by loading a
CRBasic program with a USR drive size entered in a

SetSetting()

instruction. Partition the

USR drive to at least 11264 bytes in 512-byte increments. If the value entered is not a multiple of
512 bytes, the size is rounded up. Maximum size of USR 2990000 bytes.

NOTE:
Placing an optional USR size setting in the CRBasic program overrides manual changes to
USR size. When USR size is changed manually, the CRBasic program restarts and the
programmed size for USR takes immediate effect.

Files in the USR drive can be managed through datalogger support software File Control or
through the

FileManage()

instruction in CRBasic program.

5. Data memory

40

«
...
54
55
56
57
58
...
»

Содержание CR1000X















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CR1000X

Бренд: CARLO GAVAZZI Страницы: 44

Бренд: ATS Страницы: 13

Бренд: T&D Страницы: 2

Бренд: ELEKON Страницы: 4

SMARTdiagnostics

Бренд: KCF technologies Страницы: 14

Бренд: Racelogic Страницы: 4

Бренд: Racelogic Страницы: 15

Hydro-Logic Flexi Logger 300Ex

Бренд: Hydro International Страницы: 74

Бренд: Capetti Elettronica Страницы: 9

Бренд: B+B Sensors Страницы: 18

Бренд: ACR Electronics Страницы: 26

Бренд: Vaisala Страницы: 21

Бренд: 3M Страницы: 15

MIR 6000 Series

Бренд: Tamam tadbir Страницы: 27

OM-SQ2020 Series

Бренд: Omega Engineering Страницы: 24

EasyLog 9902-2004

Бренд: Lascar Electronics Страницы: 2

Бренд: Lascar Electronics Страницы: 2

Бренд: Lascar Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды