Cadex C7200 Скачать руководство пользователя страница 93 | Manualshive

Страница: 93 / 176

Cadex C7200 Скачать руководство пользователя страница 93

Program Parameters

There are a number of settings available that affect the way the Cadex analyzer
functions in most or all of its programs.

Starting Battery Service

By default, when a battery is inserted into the Cadex analyzer, the analyzer
prompts to verify the C-code before service starts. This verification can be turned
off so users can run a battery service as soon as a battery is inserted as follows:

•

The Cadex analyzer asks for Battery ID number and asks to verify C-code
settings.

•

The Cadex analyzer asks for Battery ID number only.

•

The Cadex analyzer asks to verify C-code settings only (default).

•

The Cadex analyzer starts the program using the active C-code without asking to
enter the Battery ID or verify the C-code.

To verify C-code or enter Battery ID before battery service begins

1.

From the global display, press

MENU

.

2.

Press

or

to scroll to

OPTION CONTROLS

and then press

ENTER

.

3.

Press

or

to scroll to

ASK FOR BATTERY ID

#

4.

Press

or

to scroll to the required setting:

•

YES

sets the Cadex analyzer to ask for the Battery ID number.

•

NO

(default) sets the Cadex analyzer not to ask for Battery ID

number.

5. Press

or

to scroll to

ASK FOR BATTERY

C-

CODE

5.

Press

or

to scroll to the required setting:

•

YES

sets the Cadex analyzer to ask the user to verify C-code

settings.

77

«
...
91
92
93
94
95
...
»

Содержание C7200

















































































































































































Отзывы:

Нет отзывов