Cadex C7200 Скачать руководство пользователя страница 127

Страница: 127 / 176

Power on the analyzer and release the

MENU

key

Allow the analyzer to complete bootup. The analyzer will enter a Test
Mode during this sequence.

Power off the analyzer and then power it on as normal.

The parameters that are reset to their default values include:

•

OhmTest, Runtime, Self-Discharge, Life Cycle and custom programs.

•

Battery startup settings.

•

Key sound and alert sound.

•

USB port device.

•

Voltage display.

•

Service counter (number of batteries serviced)

•

The setting for the serial port device changes to B

ATTERY

HOP

Cleaning the Analyzer

Caution! Before cleaning, turn off the power and unplug the

AC power cord.

Clean the analyzer only with a damp cloth moistened with mild

soap and water and allow to thoroughly dry.

Do not allow any

liquids to enter the analyzer case under any circumstances.

111

Содержание C7200

















































































































































































Результаты поиска

Содержание C7200

Отзывы:

Cadex C7200, Руководство пользователя, Страница: 127 / 176

Результаты поиска

Содержание C7200

Отзывы: