Cadex C7200 Скачать руководство пользователя страница 125

Страница: 125 / 176

Chapter 11

Services and Upgrades

CAUTION

There are no internal user-serviceable parts in the Cadex

analyzer. Unauthorized disassembly and/or repair of the
analyzer by other than an authorized Cadex Service Center will

void the warranty.

Replacing the Primary (Input) Fuse

If the analyzer does not power up, first check that the power cord is properly
inserted and there is power available. If the analyzer does not power up, then
primary (input) fuse may need to be replaced (see Appendix D -

Parts and

Accessories,

page 154).

To replace the primary fuse

Remove all batteries and adapters, turn off the analyzer and unplug
the power cord. Wait one minute before continuing.

Locate the fuse holder below the power cord socket.

Open the fuse cover by turning it counterclockwise with a small coin or
screwdriver.

Figure 12: Replacing the fuse

109

Содержание C7200

















































































































































































Результаты поиска

Содержание C7200

Отзывы:

Cadex C7200, Руководство пользователя, Страница: 125 / 176

Результаты поиска

Содержание C7200

Отзывы: