Cadex C7200 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 176

Cadex C7200 Скачать руководство пользователя страница 3

Safety Notices

i

Trademark

Cadex, BatteryShop, QuickLearn, QuickTest, QuickSort, FlexArm, RigidArm are
registered trademarks of Cadex Electronics Inc. All other trademarks mentioned
herein are the property of their respective owners.

Copyright

Copyright © 2008 by Cadex Electronics Inc. All rights reserved. No part of this
publication or the firmware controlling Cadex product(s) may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any
language or computer language in any form or by any means without the express
written permission of Cadex Electronics Inc.

Revision Rights

Cadex Electronics Inc. reserves the right to revise this publication and make
changes in the contents thereof without obligation to notify any person of such
changes. Please e-mail [email protected] for suggestions or corrections.

Disclaimer

While every effort is made to ensure that the information contained in this manual is
accurate and up-to-date, Cadex Electronics Inc. does not warrant or guarantee the
accuracy of the contents of this manual. Further, Cadex makes no warranties,
either expressed or implied, as to the merchantability or fitness for a particular
purpose of the Cadex C7000 C-Series Battery Analyzers (C7200-C, C7400-C and
C7400ER-C) equipment and/or its documentation.

In no event will Cadex or its officers or employees be held responsible for any
consequential, incidental, or indirect damages (including damages for loss or
business profits, business interruption, and the like) arising out of the use or
inability to use the Cadex C7000 C-Series Battery Analyzers (C7200-C, C7400-C
and C7400ER-C) Battery Analyzer equipment and/or its documentation.

«
1
2
3
4
5
...
»

Содержание C7200

















































































































































































Отзывы:

Нет отзывов