
-
Use
B
ATTERY
S
HOP
to use the unit with Cadex analyzer
BatteryShop™ software.
-
Use
TERMINAL
to connect to a computer to display and analyze
service data (see
-
Use
LABEL MAKER
to connect to a Dymo-CoStar SE300 label
printer.
-
Use
P
RINTER
to connect to a serial dot matrix Epson
compatible printer. Since serial printers are no longer
available, use the USB port or a SP-2 converter (see Appendix
D -
page 154)
-
DISABLED
if there are no devices connected to a serial port.
5.
Press
ENTER
.
6.
Press
or
to scroll to
YES
to accept changes and press
ENTER
.
7.
Press
to scroll to
SERIAL PORT SETTINGS
and then press
ENTER
. Skip
this step if connecting to BatteryShop or the Dymo-CoStar SE300 label
printer.
8.
Enter the required settings as specified in the device user’s manual
(see above for available options):
Press
or
to move the cursor from option to option.
Press
or
to scroll through available settings.
9.
Press
ENTER
.
10.
Press
or
to scroll to
YES
to accept changes and press
ENTER
.
11.
Press
ESC
twice to return to the global display.
Typical Serial Cable Pin Configurations
Note: Do not use these configurations for the Dymo SE300 printer. Use the cable
that is supplied with the printer.
73