THEN and ELSE Statements
There are ten possible responses to the results of the
IF
statement. Each of these
responses is available as a
THEN
statement (for when a battery meets the
condition, or passes) or as an
ELSE
statement (for when a battery does not meet
the condition, or fails).
THEN/ELSE Statement
Description
Starts the next phase.
Starts the next phase.
Go to Phase 1
Starts Phase 1.
Go to Phase 2
Starts Phase 2.
Go to Phase 3
Starts Phase 3.
Go to Phase 4
Starts Phase 4.
Go to Phase 5
Starts Phase 5.
Go to Done
Starts Phase Done.
REPEAT 0 times
Repeats actions in the current phase the number of
times specified.
Available settings:
1 to 8
FOREVER
. The program continues forever. See the
“IF Loop Count<Max” and “IF Loop Count>Max”
statements, above.
REST for 000:00:00
Applies no current for the specified time period (in
hhh:mm:ss format). The
RESTING
message (code
19) is displayed with time counting down.
After resting, the program goes to the next phase.
FAIL
Fails the battery. The battery is electrically
disconnected, the
FAIL
light comes on, and the
WARNING
message (code 16) appears.
Phase Done
Perform one of three different actions in the final phase of the custom program.
Action Description
Cadex Electronics Inc. C7000-C Series Battery Analyzers
.
104