Cadac J-Type, Инструкция по установке и эксплуатации

Страница: 63 / 200

7496 Dual Input Channel 3-13
Revision J2005-2 J-Type
61516 , 2 3 #4# 3)/
Press this button to ‘listen’ to the signal on I/P1 only (pre routing and EQ).
61517 , 2 3 #4# ² 53 G% # 3DG
Press this button to change the input from “microphone sensitivity” to “line level”. The
‘20dB’ pad is inserted before the input amplifier.
61518 , 2 3 #4# 3KDQWRP # 3RZHU
Press this button to connect 48V phantom power to the input connector. This func-
tion has a slow ’ramp-up’ (approximately 30 seconds to get from 0v to 48v).
61519 , 2 3 #4# 3KDVH # &KDQJH
When this button is selected, the input signal phase is reversed (180°).
6151: , 2 3 #4# 2Q 2 2II
Input on/off switches are provided so that input signals can be changed (switched
on-to-off or vice-versa) under program control.
6151; , 2 3 #5# *DLQ
As 3.2.1, but for input 2.
6151< , 2 3 #5# 1XOO # /('
As 3.2.2, but for input 2.
615143 , 2 3 #5# 3)/
As 3.2.3, but for input 2.
615144 , 2 3 #5# ² 53 G% # 3DG
As 3.2.4 but for input 2.
615145 , 2 3 #5# 3KDQWRP # 3RZHU
As 3.2.5, but for input 2.
615146 , 2 3 #5# 3KDVH # &KDQJH
As 3.2.6, but for input 2.
615147 , 2 3 #5# 2Q 2 2II
As 3.2.7, but for input 2.