Cadac J-Type, Инструкция по установке и эксплуатации

Страница: 89 / 200

7925 Programmable Group Module 4-3
Revision J2005-2 J-Type
71417 0DWUL[ # ,QMHFW # 2Q 2 2II
On/Off switch for the Inject circuit.
71418 0DWUL[ # $ # ,QVHUW # ,Q 2 2XW
All Matrix Groups have a “SEND” and “RETURN” break-jack facility. This is to allow
the group signal to be sent out to, and returned from an external audio-processing
unit. The group signal is always present at the “SEND” jack, but when ‘insert’ is not
selected, the group signal will by-pass the “RETURN” jack.
Press the “INS” button to ‘open’ the “RETURN” jack and receive the modified signal
from the external audio-processing unit.
71419 0DWUL[ # $ # 2 2 3 # /HYHO
Potentiometer for controlling the Matrix output level.
7141: 0DWUL[ # $ # 2 2 3 # /HYHO # 1XOO # /('
The Null LED will be illuminated if the position of the Matrix A O/P Level pot is differ-
ent from the programmed position. To recall the programmed position, rotate the
potentiometer until the LED goes ‘out’.
7141; 0DWUL[ # $ # 3)/
Press this button to ‘listen’ to the signal on Matrix A only, (pre O/P Level pot).
7141< 0DWUL[ # $ # 0XWH
Manual, and programmable mute for Matrix A.
714143 0DWUL[ # 6HFWLRQ # ,VRODWH
This function ‘isolates’ the switch and potentiometer recall data (for Matrix A and B)
from the computer. There are many instances during a production rehearsal, when
module routing or level changes need to be made to solve a problem. When you are
rehearsing a sequence of cues, there may not be time to record the changes in all of
the cues that are affected. When you press the ‘ISOLATE’ button, previously
recorded switch and pot data will be ignored by the module, leaving the controls at
their new setting until you cancel the function.
714144 0DWUL[ # % # 2 2 3 # /HYHO # 0HWHU
As 4.1.1, but for Matrix B.
714145 714145 714145 714145 0DWUL[ # % # ,QMHFW # /HYHO
As 4.1.2, but for Matrix B.
714146 0DWUL[ # % # ,QMHFW # /HYHO # 1XOO # /('
As 4.1.3, but for Matrix B.