Cadac J-Type, Инструкция по установке и эксплуатации

Страница: 73 / 200

7830 Dual input channel 3-23
Revision J2005-2 J-Type
616## :;63# 'XDO # LQSXW # FKDQQHO
The 7830 Dual Input Channel is one of two fully programmable mono input channels
where all switch data and potentiometer position data can be saved to and recalled
from a cue, using the CADAC
Sound Automation Manager software.
The inputs have controls for gain, 20 dB pad, phase-change, phantom power, on/off
and PFL. This allows either input to be used with microphone or line level sources.
The two input signals are ‘mixed’, when both input amplifiers are selected ‘on’. The
Oscillator Bus can be injected into both input amplifiers and all input switching can be
isolated from the computer.
The direct output may be selected pre or post the channel fader, and/or pre or post
the EQ section.
Routing switches to all 16 sub groups are provided and the pan-pot may be inserted
to ‘pan’ between ‘odd’ and ‘even’ sub groups.
There are ten mono and one stereo auxiliary send sections. Each of the aux-sends
can be switched on/off and pre or post fader.
The four-band equalizer has controls for ±18 dB boost or cut, variable frequency and
“Q”. The equalizer section is independent from the variable frequency low-pass and
high-pass filter sections. It is therefore possible to program the channel so that when
input 1 is selected, the four band EQ is inserted and when input 2 is selected, the LP
and HP filters are inserted.
An external audio processing device can be connected to the module via ‘TRS’ send
and return jacks. The external processor is connected in series with the channel sig-
nal when ‘Insert’ is selected. The EQ and Filters can be switched pre or post the
insert point.
All audio inputs and outputs are electronically balanced.