Cadac J-Type, Инструкция по установке и эксплуатации

Страница: 75 / 200

7830 Dual input channel 3-25
Revision J2005-2 J-Type
61619 , 2 3 #4# 3KDVH # &KDQJH
When this button is selected, the input signal phase is reversed (180°).
6161: , 2 3 #4# 2Q 2 2II
Input on/off switches are provided so that input signals can be changed (switched
on-to-off or vice-versa) under program control.
6161; , 2 3 #5# *DLQ
As 3.3.1, but for input 2.
6161< , 2 3 #5# 1XOO # /('
As 3.3.2, but for input 2.
616143 , 2 3 #5# 3)/
As 3.3.3, but for input 2.
616144 , 2 3 #5# ² 53 G% # 3DG
As 3.3.4, but for input 2.
616145 , 2 3 #5# 3KDQWRP # 3RZHU
As 3.3.5, but for input 2.
616146 , 2 3 #5# 3KDVH # &KDQJH
As 3.3.6, but for input 2.
616147 , 2 3 #5# 2Q 2 2II
As 3.3.7, but for input 2.
616148 2VFLOODWRU # %XV # 6HOHFW
Press this button to connect inputs 1 and 2 to the ‘Oscillator/PNG’ bus. For this func-
tion to work, the ‘Oscillator/PNG’ module must be selected to “CHANNELS”. This
facility allows you to check that an individual module, or the whole console is working
correctly.
616149 ,QSXW # $PSOLILHU # ,VRODWH
This function ‘isolates’ the switch and potentiometer recall data (for both input ampli-
fiers) from the computer. There are many instances during a production rehearsal,
when module routing or level changes need to be made to solve a problem. When
you are rehearsing a sequence of cues, there may not be time to record the changes
in all of the cues that are affected. When you press the ‘ISOLATE’ button, previously