manualshive.com logo in svg

burmeier Regia, Инструкция по эксплуатации

Поделиться
Скачать
burmeier Regia Скачать руководство пользователя страница 92

7

Replacement of electrical compo-
nents

7.1

Safety information

WARNING

WARNING

Danger of death due to electric shock!

Failure to heed this warning may result in injury due to electric shock.

•

Before commencing any work on electrical equipment, always unplug the mains cable
from the electrical socket!

•

Any work and/or repairs to the electrical equipment may only be carried out by the service
engineers, the drive manufacturer or qualified and authorised electricians in compliance
with all the relevant VDE and safety regulations!

•

On no account should the user attempt to rectify malfunctions in the electrical system!

Crushing hazard due to falling mattress base parts!

Failure to heed this warning may result in physical injury due to crushing.

•

The bed must be in the home position (with the mattress base horizontal) in order to re-
move the motors. Otherwise, there is a danger of crushing from falling mattress base sec-
tions.

•

Before removing drives, secure the affected adjustable bed elements from accidentally
falling off (e.g. using suitable support stands).

56

Part B: Operator and Technical Personnel

Содержание Regia

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды