manualshive.com logo in svg

burmeier Regia, Инструкция по эксплуатации

Поделиться
Скачать
burmeier Regia Скачать руководство пользователя страница 37

1

Target Groups, Qualifications and
Duties

1.1

Operator

1.1.1

Responsibilities of the operator

Operators (e.g. medical equipment retailers, specialist dealers, health insurance) are all nat-
ural or legal persons who use this bed or on whose behalf it is used. It is a requirement that
the operator duly instructs care staff in its use.

Please observe your obligations as the operator in accordance with the Medical Devices Op-
erator Ordinance (Medizinprodukte-Betreiberverordnung, German abbreviation: MPBe-
treibV), to ensure that this medical product is always operated safely and with no risk to resi-
dents, care staff or third parties. In other countries the relevant national regulations concern-
ing the duties of the operator must be followed!

Only permit persons who have been properly instructed to use this bed!

•

In Germany: Ensure that care staff know where this instruction manual is kept, in ac-
cordance with the Medical Devices Operator Ordinance (MPBetreibV) § 9! In other
countries, the relevant national regulations must be complied with!

•

Using this instruction manual, which is provided with this care bed, ensure that care
staff is instructed in the safe operation of this bed before using it for the first time!

•

Draw every user’s attention to the possible hazards that can arise if the bed is improp-
erly used. This applies in particular to the use of electrical drives and safety sides!

•

Make sure that substitute staff are also sufficiently well instructed in the safe operation
of the care bed!

•

Use this bed only as intended by the manufacturer, in accordance with the instructions
in this manual.

Check to ensure that the safety instructions are adhered to!

If the bed is in long-term use, test the functions and check for visual damage in accordance
with chapter 

Part C: Maintenance

»

35

 after a reasonable period of time!

If the care bed changes ownership, the instruction manual must be handed over with the
bed.

If any other equipment is attached to the bed, (e.g. compressors for positioning systems,
etc.), ensure that this is securely fastened and is functioning properly.

If anything is unclear, please contact the manufacturer of the device, or Burmeier.

Part B: Operator and Technical Personnel

1

Содержание Regia

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды