manualshive.com logo in svg

burmeier Regia, Инструкция по эксплуатации

Поделиться
Скачать
burmeier Regia Скачать руководство пользователя страница 129

3.7.2

Slewing Range

WARNING

3.8

Triangular grab handle

3.8.1

Service Life

Part C

: 

Image2:

Slewing range of patient lifting pole

Risk of injury

Failure to heed this warning may result in injury and damage to property due to the bed tip-
ping up.

•

Only swivel the patient lifting pole within the slewing range of the bed [A].

•

The metal pin of the patient lifting pole must therefore always sit in the adapter sleeve re-
cess!

Otherwise, there is a danger that the bed will tip up when weight is applied to the pole.

A triangular grab handle can be attached to the lifting pole. The resident can use this grab
handle to sit up and readjust his/her position more easily. Check the grab handle and belt
regularly for damage (see 

Part C: Maintenance

»

35

). Replace damaged grab handles or

straps immediately.

A date is printed on the grab handle. In normal use, the grab handle has a service life of at
least five years. After this period, a visual and functional inspection must be carried out every
six months to determine whether the handle may continue to be used.

Operation

Part C: Care staff and residents

19

Содержание Regia

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды