burmeier Regia Скачать руководство пользователя страница 101

Страница: 101 / 152

10 Dismantling the Care Bed

•

Move the backrest, thigh rest and lower leg rest to a horizontal position.

•

Move the mattress base to the highest position.

•

Disconnect the switch mode power supply plug from the mains socket.

•

Remove the safety sides.

Caution: Do not let them drop!

•

Dismantle the side panel.

•

Dismantle the headboard and footboard.

•

Remove the fixing bolts for the backrest motor and place the backrest motor on the
floor.

•

Remove the fixing bolts for the thigh rest motor and place the thigh rest motor on the
floor.

•

Undo the connection screws on the mattress base at the head and foot end.

•

Take the mattress base off.

•

Reinsert the plug of the switch mode power supply into the mains socket.

•

Move the chassis to the lowest position.

•

Disconnect the switch mode power supply plug from the mains socket.

•

Insert the backrest motor and thigh rest motor in their transport position and secure
these with bolts.

•

All loosened screws should be re-tightened for transport, and the plug cover should be
put back in position (to prevent it from getting lost).

Part B: Operator and Technical Personnel

Содержание Regia

























































































































































Результаты поиска

Содержание Regia

Отзывы:

Бренды по названию

Популярные бренды

burmeier Regia, Инструкция по эксплуатации

Результаты поиска

Содержание Regia

Отзывы:

Бренды по названию

Популярные бренды