manualshive.com logo in svg

burmeier Regia, Инструкция по эксплуатации

Поделиться
Скачать
burmeier Regia Скачать руководство пользователя страница 136

3.9.2.1

Raising

CAUTION

3.9.2.2

Lowering

Risk of injury

Failure to heed this warning may result in physical injury due to the incorrect use of safety
sides!

•

When making any adjustments with the safety sides and backrest raised, always ensure
that no limbs of residents, care staff or other persons, especially playing children, could
become trapped and injured underneath the rests and mattress sections or between the
mattress retainer and the safety sides during the adjustment.

1.

Raise the safety side bars, one after the other, at one end until they click into place at
both ends. It should not be possible to push the bars up or down.

2.

Check that the safety side bars are securely locked in place by pressing down on them.

1.

Lift the safety side bars slightly at one end.

2.

Press the release button [1] in with your finger.

3.

Lower the safety side bars slowly.

Operation

26

Part C: Care staff and residents

Содержание Regia

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды