manualshive.com logo in svg

burmeier Regia, Инструкция по эксплуатации

Поделиться
Скачать
burmeier Regia Скачать руководство пользователя страница 81

•

We recommend cleaning the bed by wiping it with a (damp) cloth. When selecting clean-
ing agents, ensure that the agents chosen are mild (gentle to skin and surfaces) and envi-
ronmentally friendly. A standard household detergent or a cleaning and disinfection agent
tested by Burmeier can generally be used. Refer to 

Part C: Cleaning agents and disinfec-

tants

»

38

.

•

Ensure that no liquid residues remain on any parts of the bed after cleaning or disinfec-
tion. Otherwise the surfaces in these areas may become damaged in the long term.

•

It is essential to follow the manufacturer’s dosage advice for cleaning agents and disinfec-
tants to prevent damaging the plastic and painted or metal surfaces! It is not permitted to
clean the bed using a manually operated steel jet nozzle which is, for example, connected
to a steam cleaner/high pressure cleaner. A minimum distance of 30 cm from the electri-
cal components cannot be guaranteed in this case.

•

If, despite its excellent mechanical resistance, the coated surface is damaged by scratch-
es or marks that permeate the entire coating, the affected areas should be resealed using
a suitable repair substance to prevent moisture from penetrating. For further information,
consult BURMEIER or a specialist dealer of your choice.

•

Disinfectants based on compounds that could potentially release chlorine may be corro-
sive for metals, synthetics, rubbers and other materials over longer contact periods or
when concentrations are too high. Use these agents sparingly and only if expressly re-
quired.

•

For disinfection by wiping, most cleaning and disinfection agents usually used in hospitals
or care facilities can be used, such as cold and hot water, detergents, alkaline solutions
and alcohols.

•

These agents must not contain any substances that could change the surface structure or
the adhesive properties of the plastic materials.

The choice of cleaning agents and disinfectants available on the market may change from
time to time. Burmeier therefore routinely tests the most commonly used materials for com-
patibility. The most up-to-date list of tested cleaning agents and disinfectants can be obtained
on request.

Our customer service centre in Germany:

Burmeier GmbH & Co. KG

(A Stiegelmeyer-Group company)

Industriestraße 53 / 32120 Hiddenhausen / Germany

Tel.:+49 (0) 5223 9769 - 0 • Fax:+49 (0) 5223 9769 - 090

Email:[email protected]

Internet:www.burmeier.com

Cleaning and Disinfection

Part B: Operator and Technical Personnel

45

Содержание Regia

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды