manualshive.com logo in svg

burmeier Regia, Инструкция по эксплуатации

Поделиться
Скачать
burmeier Regia Скачать руководство пользователя страница 103

12 Appendix

12.1

Accessories

WARNING

12.1.1

Mattress requirements

The bed must only be operated with original Burmeier accessories. Burmeier does not ac-
cept any responsibility for accidents, defects and hazards that arise from the use of other ac-
cessories.

Risk of injury

Failure to heed this warning may result in physical injury to residents

•

Make sure that using safety sides, infusion stands, etc. do not produce any crush or
shearing zone for the resident when the back or leg rest is adjusted

•

If this cannot be guaranteed, care staff must safely prevent the resident from adjusting the
back and leg rests.

•

Lock the handset adjustment options in such cases.

Up-to-date lists of accessories can be obtained from Burmeier and their sales partners.
Please quote the bed model.

Here are some examples of accessories:

•

Mattresses, various, dimensions → see 

Part B: Mattress requirements

»

67

•

Reading lamps, various

•

Protective covers for safety sides

•

Under bed light

•

Wall deflector rollers

•

Linen holder

Removable parts:

 Plug-in power supply: Manufacturer: Linak; type SMPS 20

Basic dimensions:

Part B: Operator and Technical Personnel

67

Содержание Regia

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды