Bull Cedoc Bullx R423-E3, Инструкция по установке и эксплуатации

Страница: 45 / 98

5.8 Connector Definitions
Power Connectors
A 24-pin main power supply
connector (J22) and two 8-pin power
connectors (JPWR1/JPWR2) are
provided on the serverboard. These
power connectors meet the SSI EPS 12V
specification. These power connectors
must be connected to your power
supply. See the table on the right for
pin definitions .
Secondary Power Connector
JPWR1 and JPWR2 must also be
connected to the power supply. See the
table on the right for pin definitions.
Power Button
The Power On connection is on pins
1nd 2 of JF1. These should be
connected to the chassis power but- ton.
See the table on the right for pin
definitions .
Reset Button
The Reset Button connection is located
on pins 3 and 4 of JF1 and attaches to
the reset switch on the computer
chassis. See the table on the right for
pin definitions.
Chapter 5. Advanced Serverboard Setup 35