Bull Cedoc Bullx R423-E3, Инструкция по установке и эксплуатации

Страница: 19 / 98

2.5.3 Outer Rack Rails
R423-E3 chassis extend between 30 inches and 33 inches.
Installing the Outer Rails to the Rack (Figure 2-3)
1. Secure the back end of the outer rail to the rack, using the screws provided.
2. Press the button where the two outer rails are joined to retract the smaller outer rail.
3. Hang the hooks of the rails onto the rack holes and if desired, use screws to secure
the front of the outer rail onto the rack.
4. Repeat steps 1-3 for the remaining outer rail.
Figure 2-3. Assembling the Outer Rails
Installing the Chassis into a Rack (Figure 2-4)
1. Extend the outer rails as illustrated above.
2. Align the inner rails of the chassis with the outer rails on the rack.
3. Slide the inner rails into the outer rails, keeping the pressure even on both sides.
When the chassis has been pushed completely into the rack, it should click into the
locked position.
4. Optional screws may be used to secure the front of the chassis to the rack.
Chapter 2. Server Installation 9