Bull Cedoc Bullx R423-E3, Инструкция по установке и эксплуатации

Страница: 81 / 98

Console Redirection (for EMS)
Select Enabled to use a COM Port selected by the user for Console Redirection. The options
are Enabled and Disabled .

Console Redirection Settings (for EMS)
This feature allows the user to specify how the host computer will exchange data with the
client computer, which is the remote computer used by the user .
Out-of-Band-Mgmt Port
Use this feature to select the port for out-of-band management. The options are COM1 and
COM2.
Terminal Type
This feature allows the user to select the target terminal emulation type for Con- sole
Redirection. Select VT100 to use the ASCII character set. Select VT100+ to add color and
function key support. Select ANSI to use the extended ASCII character set. Select VT-UTF8 to
use UTF8 encoding to map Unicode characters into one or more bytes. The options are ANSI,
VT100, VT100+, and VT-UTF8 .
Bits per Second
This item sets the transmission speed for a serial port used in Console Redirection. Make sure
that the same speed is used in the host computer and the client computer. A lower transmission
speed may be required for long and busy lines. The options are 9600, 19200, 57600, and
115200 (bits per second) .
Flow Control
This feature allows the user to set the flow control for Console Redirection to prevent data
loss caused by buffer overflow. Send a "Stop" signal to stop sending data when the receiving
buffer is full. Send a "Start" signal to start sending data when the receiving buffer is empty.
The options are None, Hardware RTS/ CTS, and Software Xon/Xoff .
Data Bits, Parity, Stop Bits
The setting for each of these features is displayed .
Chapter 7. BIOS 71