Bull Cedoc Bullx R423-E3, Инструкция по установке и эксплуатации

Страница: 9 / 98

Preface
Note The Bull Support Web site may be consulted for product information, documentation,
downloads, updates and service offers:
http://support.bull.com
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the R423-E3 server. Installation and
maintenance should be performed by experienced technicians only .
The R423-E3 server is a high-end server based on the R423-E3 chassis and the R423-E3
serverboard dual processor serverboard.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with the server
system and describes the main features of the R423-E3 serverboard and the R423-E3
chassis .
Chapter 2: Server Installation
This chapter describes the steps necessary to install the R423-E3 server into a rack
and check out the server configuration prior to powering up the system. If your server
was ordered without processor and memory components, this chapter will refer you to the
appropriate sections of the manual for their installation .
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs located
throughout the system .
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general overview of
safety precautions that should be followed when installing and servicing the R423-E3
server .
Chapter 5: Advanced Serverboard Setup
Chapter 5 provides detailed information on the R423-E3 serverboard, including the
locations and functions of connections, headers and jumpers. Refer to this chapter when
adding or removing processors or main memory and when reconfiguring the
serverboard .
Chapter 6: Advanced Chassis Setup
Refer to Chapter 6 for detailed information on the R423-E3 server chassis. You should
follow the procedures given in this chapter when installing, removing or reconfiguring
SAS/SATA or peripheral drives and when replacing system power supply units and
cooling fans .
Preface vii