Bull Cedoc Bullx R423-E3 Скачать руководство пользователя страница 74

Страница: 74 / 98

Data Scrambling

Select Enabled to enable data scrubbing and ensure data security and integrity. The options

are Disabled and Enabled.

DRAM RAPL

RAPL which stands for Running Average Power Limit is a feature that provides mechanisms to

enforce power consumption limits on supported processors The options are Mode 0,

MODE1, and Disabled.

Device Tagging

Select Enabled to support device tagging. The options are Disabled and Enabled.

Thermal Throttling

Throttling improves reliability and reduces power consumption in the processor via automatic

voltage control during processor idle states. The options are Disabled and CLTT (Closed Loop

Thermal Throttling).



South Bridge Configuration

This feature allows the user to configure the settings for the Intel PCH chip.

PCH Information

This feature displays the following PCH information.

Name

: This item displays the name of the PCH chip.

Stepping

: This item displays the status of the PCH stepping.

USB Devices

: This item displays the USB devices detected by the BIOS.

All USB Devices

This feature enables all USB ports/devices. The options are Disabled and Enabled. (If set to

Enabled, EHCI Controller 1 and Controller 2 will appear.)

EHCI Controller 1/EHCI Controller 2

Select Enabled to enable Enhanced Host Controller Interface (EHCI) Control- ler 1 or Controller

2 to improve overall platform performance. The options are Enabled and Disabled

Legacy USB Support (Available when USB Functions is not Disabled)

Select Enabled to support legacy USB devices. Select Auto to disable legacy support if USB

devices are not present. Select Disable to have USB devices available for EFI (Extensive Firmware

Interface) applications only. The settings are Disabled, Enabled and Auto.

Port 60/64 Emulation

Select Enabled to enable I/O port 60h/64h emulation support for the legacy USB keyboard so

that it can be fully supported by the operating systems that does not recognize a USB device. The

options are Disabled and Enabled.

EHCI Hand-Off

This item is for operating systems that do not support Enhanced Host Controller Interface (EHCI)

hand-off. When enabled, EHCI ownership change will be claimed by the EHCI driver. The options

are Disabled and Enabled.

bullx R423-E3 - Installation and User's Guide

Содержание Bullx R423-E3



































































































Результаты поиска

Содержание Bullx R423-E3

Отзывы:

Похожие инструкции для Bullx R423-E3

Бренды по названию

Популярные бренды

Bull Cedoc Bullx R423-E3, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Bullx R423-E3

Отзывы:

Похожие инструкции для Bullx R423-E3

Бренды по названию

Популярные бренды