Bull Cedoc Bullx R423-E3 Скачать руководство пользователя страница 60

Страница: 60 / 98

WARNING

Use caution when working around the backplane. Do not touch the backplane with any

metal objects and make sure no ribbon cables touch the backplane or obstruct the holes,

which aid in proper airflow.

WARNING

Regardless of how many hard drives are installed, all drive carriers must remain in the

drive bays to maintain proper airflow

6.4.3

Hard Drive Backplane

The hard drives plug into a backplane that provides power, drive ID and bus termination.

A RAID controller can be used with the backplane to provide data security. The operating

system you use must have RAID support to enable the hot-swap capability of the hard

drives. The backplane is already preconfigured, so no jumper or switch configurations are

required.

6.4.4

DVD-ROM Installation (Optional)

The top cover of the chassis must be opened to gain full access to the DVD-ROM drive

bay. The R423-E3 server accommodates only slim type DVD-ROM drives. Side mounting

brackets are typically needed to mount a slim DVD-ROM drive in the server.

Accessing the Inside of the Chassis

Grasp the two handles on either side and pull the unit straight out until it locks (you

will hear a "click").

Next, depress the two buttons on the top of the chassis to release the top cover and

at the same time, push the cover away from you until it stops. You can then lift the

top cover from the chassis to gain full access to the inside of the server.

bullx R423-E3 - Installation and User's Guide

Содержание Bullx R423-E3



































































































Результаты поиска

Содержание Bullx R423-E3

Отзывы:

Похожие инструкции для Bullx R423-E3

Бренды по названию

Популярные бренды

Bull Cedoc Bullx R423-E3, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Bullx R423-E3

Отзывы:

Похожие инструкции для Bullx R423-E3

Бренды по названию

Популярные бренды