Bull Cedoc Bullx R423-E3, Инструкция по установке и эксплуатации

Страница: 29 / 98

Advanced Serverboard Setup
Chapter 5. Advanced Serverboard Setup
19
This chapter covers the steps required to connect the data and power cables and install
add-on cards. All serverboard jumpers and connections are also described. A layout and
quick reference chart are included in this chapter for your reference. Remember to
completely close the chassis when you have finished working with the serverboard to
better cool and protect the system .
5.1 Handling the Serverboard
Electrostatic Discharge (ESD) can damage electronic components. To prevent dam- age to
any printed circuit boards (PCBs), it is important to handle them very carefully (see previous
chapter). To prevent the serverboard from bending, keep one hand under the center of
the board to support it when handling. The following measures are generally sufficient to
protect your equipment from electric static discharge .
5.1.1 Precautions
 Use a grounded wrist strap designed to prevent Electrostatic Discharge (ESD).

Touch a grounded metal object before removing any board from its antistatic bag.
 Handle a board by its edges only; do not touch its components, peripheral chips,
memory modules or gold contacts.

When handling chips or modules, avoid touching their pins.
 Put the serverboard, add-on cards and peripherals back into their antistatic bags
when not in use.

For grounding purposes, make sure your computer chassis provides excellent
conductivity between the power supply, the case, the mounting fasteners and the
serverboard.
5.1.2 Unpacking
The serverboard is shipped in antistatic packaging to avoid electrical static discharge.
When unpacking the board, make sure the person handling it is static protected.
Chapter 5.