TeraStation III iSCSI User Manual
45
Chapter 8
List of Items in Settings
Common Items (left side of the screen)
Common Items (Displayed on the left side of the screen)
iSCSI Service
Click
OFF
to stop the iSCSI service;
ON
to start it. Always stop the iSCSI service before creating or
extending volumes.
Name
Displays the TeraStation’s name.
Firmware version
Displays the TeraStation’s firmware version number.
IP Address
Displays IP address of the TeraStation’s LAN ports 1 and 2.
Place
Displays the Place from
Basic
-
Settings
-
Management Information
.
Manager
Displays the Administrator from
Basic
-
Settings
-
Management Information
.
Clients
Displays connected client
Locate TeraStation
Click to make the TeraStation beep.
Restart/Shutdown
To restart the TeraStation, click
Power Management
, then
Restart
. To turn off the TeraStation,
click
Shut Down
under “Shutdown TeraStation”.
Logout *
Log out of Settings.
*
Displayed on the upper right of the screen
The following options can be set from Settings.
iSCSI Volumes
iSCSI Volumes
iSCSI Volumes
iSCSI Volumes
To add volumes, click
Create Volume
.
To edit a volume, click a volume name.
Select a volume and click
Delete Volume
to delete the volume.
Click
Refresh
to update the volume information.
Select a volume and click
Activate
will enable the iSCSI service for the selected volume.
Select a volume and click
Inactivate
will disable the iSCSI service for the selected volume.
Note:
If the IP address of the computer is displayed in the iSCSI volume screen even though the iSCSI
volume is not connected to the computer, enabling or disabling the iSCSI volume or LVM will
fail.
Turning off or disconnecting the computer without disconnecting the drive with iSCSI
Connection Tool may cause this symptom. If this happens, connect the iSCSI volume with iSCSI
Connection Tool after rebooting the computer, or stop the iSCSI service once and perform
enabling/disabling operation of iSCSI Volume or LVM.
