TeraStation III iSCSI User Manual
52
Maintenance
Email Notification
Click
Modify Settings
to change
settings.
Click
Send Test Message
to send
a test email to the email address
which has been set.
Notification
Select whether using Email notification feature or not.
SMTP Server Address
Enter mail server address in SMTP Server Address field.
SMTP Port No.
Enter SMTP Port No.
If this is left blank, the standard port number (25) is used. If
Authentication Type is set to
Disabled
or
POP before SMTP
, then port 25
is used regardless of the number entered in this field.
Authentication Type
Select from
POP before SMTP
,
LOGIN (SMTP-AUTH)
, or
CRAM-MD5(SMTP-
AUTH/CRAM-MD5)
.
POP3 Server Address
Enter mail server address in POP3 Server Address field.
POP3 Port No.
Enter POP3 Port No.
If this is left blank, the standard port number (110) is used.
SSL/TLS
When
LOGIN (SMTP-AUTH)
or
CRAM-MD5 (SMTP-AUTH/CRAM-MD5)
are
selected for Authentication Type, specify either
SSL
or
TLS
.
Username
Enter the username for authentication.
Password
Enter the password for authentication.
Subject
Specify the subject line that emails will be sent with. Use alphanumeric
characters only. Do not use multi-byte characters.
Recipient(s)
Enter the email address of the recipient, and click
Add
. You can register
up to 5 email addresses as recipients.
Report
Select the contents for email notifications.
•
HDD Status Report
Sends the condition of the hard drives at the specified time on HDD
Status Report.
•
Fan Failure
Sends when the fan error is recognized.
•
Disk Error
Sends when the hard drive error is recognized.
•
System Alert
Sends when system is rebooted or shut down, or RAID configuration is
changed.
Syslog
Click
Modify Settings
to change
settings.
Syslog
You may select to send logs to a syslog server. Select
Enable
for Syslog
Transfer, enter the IP address of the syslog server in Syslog Server IP
Address field, and select
Save
to transmit logs to a syslog server.
Maintenance
