TeraStation III iSCSI User Manual
44
Configuring port trunking on the TeraStation:
1
Connect TeraStation’s LAN port 1 to a LAN port on your switch. If you’ve configured a port on the switch for port
trunking, use that one. Do not connect the TeraStation’s LAN port 2 yet.
2
3
4
5
Turn iSCSI Service back on.
6
Connect TeraStation’s LAN port 2 to a second LAN port on your switch. If you’ve configured another port on the
switch for port trunking, use that one.
7
Press and hold the power button on the TeraStation for 3 seconds to turn it off. Press the power button again to
power up the TeraStation.
Port trunking is now configured.
1
Select the items to configure for port trunking.
2
Click
Save
.
1
Navigate to
Basic
-
Network
-
Port Trunking
.
2
Click
Modify Settings
.
Turn off iSCSI Service on the left side of Settings.
●
Online Update
If a new firmware is available, the message “A new version of the firmware has been released. The current firmware can
be updated to the latest version.” is displayed when the TeraStation boots.
To update the firmware, open the TeraStation’s settings and navigate to
System
–
Maintenance
–
Firmware Installation
.
Click
Check for Update
to check the change log, then
Install Update
to update to the latest firmware.
Note:
Update notification will display “I52” on the LCD and a message on the login screen when an update is available. To
disable update notification, click
Disable notification of updates
.
●
Update by Downloading File from Buffalo’s Web Site
You can also update the TeraStation’s firmware manually. Visit www.buffalotech.com to download the latest TeraStation
firmware updater. Double-click the file you downloaded to unzip it. The unzipped folder will include the program to
update your TeraStation’s firmware.
Update the TeraStation’s Firmware
