TeraStation III iSCSI User Manual
6
Setup
Notes:
• If there is a DHCP server in the network, the TeraStation will get an IP address from it automatically.
• Running the TeraNavigator software will automatically assign an unused IP address to a TeraStation.
• TeraNavigator can only automatically configure one unit at a time. To reconfigure a TeraStation with TeraNavigator af-
ter its initial installation, initialize the TeraStation first.
• If no DHCP server is available and TeraNavigator is not run, a random IP address of the form 169.254.xxx.xxx (where
each xxx is a random number from 1 - 256) will be assigned to the TeraStation.
If you are using Windows 2000, XP, 2000 Server, or Server 2003, install Microsoft iSCSI Software
Initiator before installing the TeraStation. Refer to previous page.
Run TeraNavigator separately for each iSCSI TeraStation.
Note:
If no DHCP server is available on the network, an IP Address of the form 169.254.xxx.xxx (where each xxx
is a random number from 1 - 256) is randomly assigned. Run TeraNavigator to configure the TeraStation
automatically.
Adding multiple TeraStations
Refer to the separate Quick Setup Guide for connection instructions.
▼
Turn on your computer.
▼
Insert the Utility CD included in the package into the CD/DVD drive.
▼
After TeraNavigator launches, follow the instructions on the screen.
▼
Launch the iSCSI Connection Tool, click
Register iSCSI Device
, then
Connect
.
