TeraStation III iSCSI User Manual
39
Initializing Settings
Hold down the reset button until it beeps (about 5 seconds). This will reset the TeraStation’s settings to their factory de-
faults.
• The reset button initializes the following settings: IP address, Ethernet frame size, admin username and password, port
trunking (initial setting: disabled), iSCSI HDD Connection Tool detection (initial setting: enabled). Other settings can be
initialized from Settings (page 40).
• To keep the current username and password when initializing the TeraStation, navigate to
Maintenance
-
Restore/Erase
-
Restore Factory Defaults
-
Modify Settings
in Settings and select
Keep current admin password
. Click
Save
.
If you disable resetting the admin password from the reset button, you can no longer configure the TeraStation if you
forget the password. Write down your password and keep it in a safe place.
Reset Button
To reset the TeraStation’s settings to factory defaults, use the included key to open the front cover to access the reset
button. While the TeraStation is running and the power LED is lit, hold down the reset button until it beeps (about 5
seconds). This will reset the TeraStation’s settings to the factory default.
TS-RIXL
Reset Button
To press the reset button on the TS-RIXL series, use the tip of an unfolded paper
clip.
TS-IXL
Reset Button
