TeraStation III iSCSI User Manual
27
Configuring Access Restrictions for Individual Volumes
1
2
3
4
5
Click
Save
.
6
Turn back on iSCSI Service again.
Note:
Access Restrictions by Mutual Authentication using Username and Password
•
Use the following settings to set access restrictions by mutual authentication in addition to the normal access
restrictions:
In the screen described in step 4, check
Mutual Authentication
and set any password you want for Password (Mutual
Authentication). Select
Mutual Authorization
for User Authorization. The screen to enter the mutual authentication
password will open. Enter the password you set.
•
Changes to access restriction settings will not take effect until the iSCSI service has been turned off and then on again.
You’ve configured access restrictions for a volume.
Select the volume that you want to set access restrictions for.
To restrict access by user names and passwords, enable
Access
Control
, and enter Username and Password.
To restrict access by IP Address, enable
IP Address Restriction
, and
enter the IP addresses that are to be allowed access. Separate each
IP address by a comma.
Example: 192.168.11.1,192.168.11.2
Turn off iSCSI Service on the left side of Settings.
Navigate to
iSCSI Volumes
-
iSCSI Volumes
.
