manualshive.com logo in svg

Buffalo Link Station LS710D, Руководство пользователя

Поделиться
Скачать
Buffalo Link Station LS710D Скачать руководство пользователя страница 2

Notice

Regulatory Compliance Information

For Customers in the United States

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio communications. However, 
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This 
device may not cause harmful interference, and (2) this device must accept any interference received, including 
interference that may cause undesired operation.

Warning Symbols and Graphical Icons on the Product

Warning symbols are used on the product for safety operation and prevention of injury to you and damage to the 
unit. The following explains the meanings of symbols used on the product.

This symbol indicates important warnings or cautions for operation and maintenance. 
Additional information will follow this symbol.

This symbol indicates the presence of a direct current.

This symbol indicates polarity of DC connector.

Safety Precautions

Before using your device, basic safety instructions should always be followed.
(1)  Read these instructions.
(2)  Keep these instructions.
(3)  Heed all warnings and follow all instructions.
(4)  Only use the cables and accessories that are included in the package. Don’t use other accessories or cables 

unless specifically instructed to in the documentation.

1

Notice

Содержание Link Station LS710D













































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды