manualshive.com logo in svg

Buffalo Link Station LS710D, Руководство пользователя

Поделиться
Скачать
Buffalo Link Station LS710D Скачать руководство пользователя страница 185

Chapter 10 Drive Replacement and 
Troubleshooting

Replacing a Defective Drive

Depending on the RAID mode you have configured, the procedure after replacing the defective drive may vary. 
Refer to the section of the configured RAID mode and follow the described procedure.

Notes: 

•  Do not replace a running drive while the LinkStation is turned on. Power down the LinkStation before changing 

the drive. While the LinkStation is running, never unplug or remove drives without dismounting them first.

•  For the replacement drive, use a Buffalo OP-HDBST series drive. The replacement drive should be the same 

capacity as the original drive.

•  If sending a defective drive to Buffalo for replacement, please keep the cartridge as Buffalo will only replace the 

drive and not the cartridge.

•  To avoid damaging the LinkStation with static electricity, ground yourself by touching something made of metal 

before handling any sensitive electronic parts.

•  After a drive is replaced, it will take about 30 minutes before normal file reading and writing operations are 

restored. Settings may not be accessible during this period.

•  Do not change the order of the drives on the LinkStation. For example, pulling out the drive in slot 1 and 

replacing it with the drive in slot 2 may cause data to be corrupted or lost.

Drive Replacement for a RAID 1 Array

If a drive used in a RAID 1 array fails, you will need to recover the RAID array after replacing the defective drive with 
a new drive. You can recover the RAID array from a computer or a mobile device. Follow the appropriate procedure 
below to recover the RAID array.

Note: 

Make sure you do not format the replaced drive. If the replaced drive is formatted, the RAID array will not be 

recoverable.

Using a Computer

1 

Back up the saved data to another location before replacing the failed drive. If one or more drives fail during 
drive replacement, data can no longer be retrieved from the LinkStation.

2 

Turn the LinkStation off and remove all cables.

184

Chapter 10 Drive Replacement and Troubleshooting

Содержание Link Station LS710D













































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды