BSH HN678G4S1 Скачать руководство пользователя страница 159

Страница: 159 / 181

Repairs

2016-03-10 / DIS 184_58300000140186_ara_en_k

Page 159 of 181

6.26

Removing and installing the NEO inverter

6.26.1

Removing the NEO inverter

Required tools:

Torx Bit TX20 [ 00340865]

Prerequisite:

•

Appliance is disconnected from the power supply.

•

Appliance has been removed. (Page 125)

•

Upper section of the housing has been removed. (Page 121)

•

Cabinet back panel has been removed. (Page 122)

•

Cabinet side panel (right) has been removed. (Page 124)

•

Swivelling panel (if any) has been removed. (Page 164)

•

Grey upper section of the ventilation duct (magnetron housing) has been

removed.

•

The electronic cooking sensor (if present) has been removed from the white

upper section of the ventilation duct (the NEO inverter housing).

1. The cable leading from the cable guide on the white upper section of the

ventilation duct (the NEO inverter cabinet) has been removed.

2. 1) (1) Press together the 4 locking catches on the white upper section of the

ventilation duct (the NEO inverter cabinet).

2) (2) Remove the upper section upwards (passing underneath the cable).

3. Unplug the cables from the contacts CN701, CN702 and CN703 on the

inverter.

Содержание HN678G4S1






















































































































































































Результаты поиска

Содержание HN678G4S1

Отзывы:

BSH HN678G4S1, Инструкции по ремонту, Страница: 159 / 181

Результаты поиска

Содержание HN678G4S1

Отзывы: