BSH HN678G4S1 Скачать руководство пользователя страница 109

Страница: 109 / 181

Test

2016-03-10 / DIS 184_58300000140186_ara_en_k

Page 109 of 181

5.26

Checking the vapour system

Required tools:

Torx T20 bit [ 00340867]

5.26.1

Checking the vapour valve motor

Prerequisite:

•

Appliance is disconnected from the power supply.

•

Appliance has been removed. (Page 125)

•

Upper section of the housing has been removed. (Page 121)

•

Vapour valve motor has been removed. (Page 181)

1. Activate the microswitch (closer) and take a measurement: S28.1 - S28.2

Result:

0 Ω = closed

∞ Ω = open

2. Measure the motor winding: M11.1 - M11.2

Result:

10 kΩ ± 10 % = OK

5.26.2

Checking the vapour valve

Prerequisite:

•

Appliance is disconnected from the power supply.

•

Appliance has been removed. (Page 125)

•

Upper section of the housing has been removed. (Page 121)

•

Vapour valve motor has been removed. (Page 181)

The vapour valve has been damaged by overextending the screw on

the flap!

► Don’t activate the vapour valve by hand.

Remove the vapour valve.

2. Visually inspect the vapour valve.

Result:

When removed from the appliance the vapour valve should be closed.

Hold the vapour valve horizontally. There may not be any gap between the

vapour valve and the housing.

3. Replace the vapour valve.
4.

Install the vapour valve motor. (Page 181)

Risk of electric shock due to live parts when performing

tests on an energised system!

► For tests on an energised system, use a residual current

circuit breaker.

► Do not touch the housing, frame, components and cables.

When it is first connected to the power supply and when it is

reset, the vapour extraction motor rotates the eccentric in order

to determine its 0° position.
The eccentric then rotates to its 90° position.
The control cam activates the microswitch only at the 0°

position (vapour valve closed).

Connect the appliance to the power supply.

6. Switch on the appliance.
7. Finalise the initial start-up settings.

Содержание HN678G4S1






















































































































































































Результаты поиска

Содержание HN678G4S1

Отзывы:

BSH HN678G4S1, Инструкции по ремонту, Страница: 109 / 181

Результаты поиска

Содержание HN678G4S1

Отзывы: