BSH HN678G4S1 Скачать руководство пользователя страница 146

Страница: 146 / 181

Repairs

2016-03-10 / DIS 184_58300000140186_ara_en_k

Page 146 of 181

4. 1) Close the fold-down door and wedge in a tea towel that has been folded

several times.

2) Pull the front glass up and place it on a level surface with the door handle

facing down.

5. 1) Hold the intermediate glass panel.

2) Push the holders upwards, but do not remove them.

3) Lift the intermediate glass panel and remove it.

6. 1) Open the fold-down door.

2) Open the locking levers on the hinges.

3) Close the fold-down door completely.

4) Remove the inner door package with inner door frame from the hinges and

place it on a level surface with the inner door glass facing down.

7. 1) Remove the top screws on the left and on the right.

2) Pull down on the inner door frame and remove it.

Содержание HN678G4S1






















































































































































































Результаты поиска

Содержание HN678G4S1

Отзывы:

BSH HN678G4S1, Инструкции по ремонту, Страница: 146 / 181

Результаты поиска

Содержание HN678G4S1

Отзывы: