GS-X Pinsetter w/Advanced (CE) Guarding Operation Manual
33
Area 4 - Pindeck
Infrequently, a pinsetter stop or maintenance requires access further into the machine. For situations
that cannot be performed from work areas 1,2, or 3, Area 4 - Pindeck can be used. Refer to the figure
titled
Pinsetter Work Area 4 - Pindeck.
This area may be used for such activities as:
1. Removing a pin from under the Sweep
2. Replacing pin light bulbs
3. Accessing the underside of the distributor
4. Working on the setting table
CAUTION: Even though the pivoting walkway has an integrated ball stop
which prevents a ball from entering the pinsetter, always make sure that a
bowler is not positioned to a throw ball before accessing work area 4. It is
good practice to have another employee positioned near any bowler to ensure
they cannot throw a ball.
CAUTION: When accessing the machine for work area 4, the main power
switch on the Nexgen or Safety Controller must be locked into the off position
using a suitable locking mechanism.
Pinsetter Work Area 4 - Pindeck
(1) WORK AREA 4
Содержание GS-X Pinsetter
Страница 1: ...Operation Manual August 2019 47 902005 GBR GS X Pinsetter with Advanced CE Guarding...
Страница 14: ...14 GS X Pinsetter w Advanced CE Guarding Operation Manual GS Safety Mirror Safety Mirror...
Страница 62: ...62 GS X Pinsetter w Advanced CE Guarding Operation Manual Intentionally Blank...