i
LS2-B891, LT2-B892
Thank you very much for buying a BROTHER sewing machine. Before using your new machine, please read the safety instructions
below and the explanations given in the instruction manual.
With industrial sewing machines, it is normal to carry out work while positioned directly in front of moving parts such as the needle
and thread take-up lever, and consequently there is always a danger of injury that can be caused by these parts. Follow the
instructions from training personnel and instructors regarding safe and correct operation before operating the machine so that you
will know how to use it correctly.
Symbols
..................... This symbol (
△
) indicates something that you should be careful of. The picture inside the triangle indi-
cates the nature of the caution that must be taken.
(For example, the symbol at left means "beware of injury".)
..................... This symbol ( ) indicates something that you must not do.
..................... This symbol (
●
) indicates something that you must do. The picture inside the circle indicates the nature
of the thing that must be done.
(For example, the symbol at left means "you must make the ground connection".)
SAFETY INSTRUCTIONS
Safety indications and their meanings
This instruction manual and the indications and symbols that are used on the machine itself are provided in order to
ensure safe operation of this machine and to prevent accidents and injury to yourself or other people. The meanings of
these indications and symbols are given below.
Indications
CAUTION
The instructions which follow this term indicate situations where failure to follow the instructions
could cause injury when using the machine or physical damage to equipment and surround-
ings.
Notes on safety
Environmental requirements
●
Use the sewing machine in an area which is free
from sources of strong electrical noise such as high-
frequency welders.
Sources of strong electrical noise may cause prob-
lems with correct operation.
●
Any fluctuations in the power supply voltage should
be within
±
10% of the rated voltage for the ma-
chine.
Voltage fluctuations which are greater than this may
cause problems with correct operation.
●
The power supply capacity should be greater than
the requirements for the sewing machine's electri-
cal consumption.
Insufficient power supply capacity may cause prob-
lems with correct operation.
●
The pneumatic delivery capability should be greater
than the requirements for the sewing machine's total
air consumption.
Insufficient pneumatic delivery capability may cause
problems with correct operation.
●
The ambient temperature should be within the range
of 5
℃
to 35
℃
during use.
Temperatures which are lower or higher than this
may cause problems with correct operation.
●
The relative humidity should be within the range of
45% to 85% during use, and no dew formation
should occur in any devices.
Excessively dry or humid environments and dew
formation may cause problems with correct opera-
tion.
●
Avoid exposure to direct sunlight during use.
Exposure to direct sunlight may cause problems
with correct operation.
●
In the event of an electrical storm, turn off the power
and disconnect the power cord from the wall outlet.
Lightning may cause problems with correct opera-
tion.
CAUTION
LS2-B891, LT2-B892 (English)