Brother GT-3 Series, Руководство по обслуживанию, Страница: 368 / 375

8. Error Code List
GT-3 Series
359
Error
code
Message Meaning Solution
4200
4201
4202
Message data Error
Error in selected language data for
the Display.
Press OK Button to recover.
Update firmware again from the beginning if you
find this error after you cancel the firmware update.
Select “Language” and reset the language.
4300
4301
4302
Font data Error Error in font data for the Display.
Press OK Button to recover.
Update firmware again from the beginning if you
find this error after you cancel the firmware update.
Select “Language” and reset the language.
4400
4401
4402
Test print data Error
Error in the Print Data in the menu
for Test Print Data
Press OK Button to recover.
Update firmware again from the beginning if you
find this error after you cancel the firmware update.
4500 Machine Error Cannot start the Network Interface
Press OK Button to recover. Check the network
and contact your Network Administrator.
Replace the Main PCB.
4501 Machine Error
Detects Illegal IP address and/or
Subnet mask.
Press OK Button to recover. Assign the proper IP
address and Subnet mask with GT-3 Maintenance
Tool. Assign all “zero” for customer who does not
use LAN connection. Refer to “6-2-7. Main PCB
Assy”.
4502 Machine Error Cannot assign Network Interface
Press OK Button to recover. Check the network
and contact your Network Administrator.
Replace the Main PCB.
4503 Machine Error Detects Illegal Default Gateway
Press OK Button to recover. Assign the proper IP
address and Subnet mask with GT-3 Maintenance
Tool.
5001
5002
5020
5021
Machine Error
Communication error inside the
firmware. Turn OFF and ON the printer.
Replace the Main PCB.
5090 Caps were not open.
5091
Machine Error
Caps were not closed.
5092 Wipers were not move (outward).
5093
Machine Error
Wipers were not move
(homeward).
Confirm the Cap Motor and Cap Origin Sensor if
they work properly.
Confirm the Wiper Motor and Wiper Origin Sensor
if they work properly.
Replace the Harness: Maintenance COM.
Replace the Main PCB.
5094 Platen did not load.
5095 Platen did not unload.
5096
Machine Error
Platen did not do LF.
Confirm the Platen Motor, Belts and sensor.
Replace the Main PCB.
5101 Machine Error Illegal print area of the print data
Turn OFF and ON the printer.
Replace the Main PCB.
5102 Machine Error Failure of unfolding print data
Turn OFF and ON the printer.
The issue is in firmware; contact Brother via your
dealer.