Brother GT-3 Series, Руководство по обслуживанию

Страница: 316 / 375

GT-3 Series
6. Replacing Parts
307
6-1-43. Felts on Cartridge Base
Required Tool

Phillips screwdriver Plus

Stubby screwdriver Plus (7 cm or shorter)

Plustic gloves

Paper or cloth with less dust
Replace the Felts when you give some operation to the Cartridge Base and find they are very dirty.
<Note>
There are two types of Cartridge Base (1), with round holes / U grooves, two types of Felts (2), round and
square),and there are three ways to apply those felts in pattern 1 to 3.
Cartridge Base (Round holes) Cartridge Base (U grooves)
(1)
(1)
Y,C,M,K W4,W3,W2,W1
W4,W3,W2,W1 Y,C,M,K
(2)
(2) (2)
Pattern 3
Pattern 2
Pattern 1
The supply part Felt (2) is square.
・
Apply two Felts on GT-381 and GT-361; one for Color side, the other for White side.
・
Apply one Felts on GT-341 for Color side.
Pattern 1 for GT-341:
Remove all the eight round Felts (2) with dirty ink.
Apply the new square Felt (2) as shown in the right photo.
Pattern 3 for GT-341
(2)
(2)
Pattern 2
for GT-341
Cartridge Base (round holes)
(1)
(2)
Pattern 1 forGT-341