Brother DCP-2537DW, Руководство по обслуживанию

Страница: 74 / 340

2-34
Confidential
3.2.2 Touch panel models
Error message
Description
Error
codes
Refer
to:
Upper line Lower line
Cannot Detect Put the Drum Unit
back in.
New process sensor could not
detect the new drum unit
correctly.
4F05 2-53
Put the Toner
Cartridge back in.
Toner cartridge is not
recognized by the cartridge
sensor.
2400 2-51
Cartridge
Error Put the Toner
Cartridge back in.
The new toner sensor of the
toner cartridge could not detect
a new cartridge properly.
4F01 2-53
New toner box sensor could not
detect the new toner box
correctly.
5E00 2-53
Cooling Down Wait for a while
The side thermistor detected a
temperature higher than the
specified value.
6801 2-57
Cover is Open -
The front cover sensor detected
that the front cover was open.
6001 2-54
The eject sensor detected that
the fuser cover was open.
6004 2-54
The ADF cover sensor detected
that the ADF cover was open.
A400 2-66
Document
Jam -
The document scanning
position sensor has not
detected the document passing
even after the document has
been fed for the specified time.
A300 2-65
Document
Jam/too Long Remove jammed
paper.
The document scanning
position sensor detected that
the document length was 90 cm
or more during the one-side
scanning.
A200 2-65
Drum ! -
Electric discharge that may be
caused by dirt on the corona
wire of the drum unit was
detected.
6A00 2-58
Failed to
Detect the
Line Type Connect the line
cord to LINE socket
on the machine, and
then set line type
from menu.
Completed auto-detect as line
cord remained connected to the
external terminal.
--- 4.13.3
Ignore Data Press Stop[x].
Received undecodable PS data. --- 4.14.1
Jam 2-sided -
After the first side is printed in 2-
sided printing mode, the
registration front sensor does
not detect paper pass after a set
period of time.
7800 2-60