Brocade Communications Systems X6-4, Руководство по установке оборудования, Страница: 29 / 249

Mounting the Device
• Mounting options...............................................................................................................................................................................................29
• Mounting precautions...................................................................................................................................................................................... 29
• Unpacking and transporting the device....................................................................................................................................................30
• Installing the 8U Chassis Airflow Diversion or Port Side Exhaust Kit for Four-Post Racks (XBR-
DCX4S-0121 and XBR-DCX4S-0130)............................................................................................................................................... 31
• Installing the 8U Chassis Mid-Mount Rack Kit for Two-Post Racks (XBR-DCX4S-0126 and XBR-
X64-0126).......................................................................................................................................................................................................... 49
• Installing the 8U Chassis 27-31-Inch Rail Rack Kit for Four-Post Racks (XBR-DCX4S-0120).................................. 56
• Removing logo bezel protective cover......................................................................................................................................................62
Mounting options
You can mount the device in the following locations:
• As a standalone unit on a flat surface, such as a table top.
• In a four-post 19 in. (48.3 cm) EIA rack:
–
Use the 27-32 inch four-post rail rack mount kit (XBR-DCX4S-0120), which contains 27-31 in. (68.58 to 78.74 cm)
expandable rails.
– Refer to Installing the 8U Chassis 27-31-Inch Rail Rack Kit for Four-Post Racks (XBR-DCX4S-0120) on page 56 for
instructions.
• In a four-post 19 in. (48.3 cm) EIA rack using an airflow diversion rack mount kit:
–
Use the 8U Chassis Airflow Diversion and Port Side Exhaust rack mount kit to divert airflow so that it fully exhausts to the
port side of the device or is fully drawn from the port side of the device while mounted in a four-post rack. The XBR-
DCX4S-0121 rack kit is designed for rack rail-to-rail depth of 27 to 31 in. (68.58 to 78.74 cm) depths and the XBR-
DCX4S-0130 kit is designed for 18 to 24 in. (45.72 to 60.96 cm) depths.
– Refer to Installing the 8U Chassis Airflow Diversion or Port Side Exhaust Kit for Four-Post Racks (XBR-DCX4S-0121 and
XBR-DCX4S-0130) on page 31 for instructions.
• In a two-post Telco rack:
–
Use the mid-mount rack kit for X6-4 Director for two-post racks (XBR-X64-0126).
– Refer to Installing the 8U Chassis Mid-Mount Rack Kit for Two-Post Racks (XBR-DCX4S-0126 and XBR-X64-0126) on
page 49 for instructions.
NOTE
Review the Mounting precautions on page 29 before mounting the device and ensure that all Facility requirements on page
23 are met.
NOTE
The preceding rack mount kits are supported for these devices on the publication date of this guide. For current support
information, contact your Brocade representative.
Mounting precautions
The following precautions specifically apply to mounting the device.
Brocade X6-4 Director Hardware Installation Guide
53-1004106-07 29