Brocade Communications Systems X6-4, Руководство по установке оборудования, Страница: 73 / 249

1. Power cable 2. Connector latch
Establishing a serial connection to the device
To establish a serial connection to the console port on the device, complete the following steps.
1. Verify that the device is powered on and that POST is complete by verifying that all power LED indicators on the power
supplies, fans, and blades display a steady green light.
2. Remove the shipping cap from the console (I0I0) port on the active CP blade. The active CP is indicated by an illuminated blue
LED on the CP blade front panel.
NOTE
The console, or serial port is intended primarily for the initial setting of the IP address and for service purposes.
3. Use the serial cable provided with the device to connect the console (serial) port on the active CP to a computer workstation.
NOTE
The active CP is indicated by an illuminated blue LED, labeled "Active," on the CP blade front panel.
If the serial port on the workstation is RJ-45 instead of RS-232, remove the adapter on the end of the serial cable and insert
the exposed RJ-45 connector into the RJ-45 serial port on the workstation.
4. Access the device using a terminal emulator application (such as HyperTerminal in a Windows environment or tip in a UNIX
environment).
5. Disable any serial communication programs running on the workstation (such as synchronization programs).
Establishing a serial connection to the device
Brocade X6-4 Director Hardware Installation Guide
53-1004106-07 73